Solid wood floor renovation tips

[zongyi]

First, what kind of floor can be refurbished
Solid wood floor refurbishment is generally done by professionals who will evaluate the floor to see if it can be refurbished. Pure solid wood flooring is completely refurbished. The refurbishment of the parquet depends on the thickness of the floor surface, because the refurbishment floor needs to be polished to a thickness of 1-2 mm on the floor surface,
and the multi-layer laminate with a surface layer thickness of less than 2 mm is not suitable for renovation. If it is refurbished, the floor is used. The life is not long, and the renovation of the three-layer composite floor with a surface layer of more than 4 mm will not affect the middle layer,
which is in line with the refurbishment conditions. Renovation of solid wood composite flooring should also take into account the surface mosaic effect and other issues.
Second, solid wood floor renovation skills
Floor polishing: Start to use large floor renovation machinery to polish the floor, prepare four different sandpapers, first sand with coarse sand, remove the paint layer, surface layer,
wood layer about 0.5 mm, and then polish the floor with fine sand to the surface is delicate and smooth, reaching a new state . The surrounding corners are polished with a special corner small angle grinder and must be manually operated if necessary.
Floor finishing: Remove the original side seam transparent putty on the floor and apply a new layer of putty. Apply glue to the cracked floor,
or fill it with wooden blocks, and fix the nails with nails to avoid problems later.Floor lacquer: first brush the primer, after the primer is dry, brush the first coat of topcoat. After the topcoat is dry, carefully grind it with water sandpaper, and grind the surface layer to a slightly rough texture. After sweeping the powder layer,
follow the above procedure to brush 2-3 Over the topcoat, the last time the paint is finished, it cannot be ground.Floor waxing: Wait until the last layer of paint is dry and then apply the floor wax. It is forbidden to walk or destroy on the floor during the renovation of the solid wood floor.
Third, the solid wood floor renovation steps
1. Find out what problems exist in solid wood flooring, such as local cracking,
severe scratching, small-scale arching, etc., and keep the impurities on the floor clean and tidy.
2, began to use large floor renovation machinery to polish the floor, prepare four different sandpaper, first sanding with coarse sand, remove the paint layer, surface layer, wood layer about 0.5 mm,
and then use fine sand to polish the floor until the surface is delicate and smooth, reaching a new state. The surrounding corners are polished with a special corner small angle grinder and must be manually operated if necessary.
3. Clear the original side seam transparent putty and apply a new layer of putty. The cracked area is coated with glue or filled with wooden blocks,
and the arched place is fixed with nails to avoid problems later.
4. Painted. First brush the primer, after the bottom is dry, brush the first coat. After the topcoat is dry, carefully grind it with water sandpaper. Grind the surface layer to a slightly rough texture. After sweeping the powder layer, brush the topcoat 2-3 times according to the above procedure. Finally,
Can not be ground at one time.
5. Wait until the last layer of paint is dry and then apply the floor wax. During the renovation period, it is forbidden to walk or destroy at random.